pcb50e willem eprom programmer software download

Repeat till desired voltage LED light up. Press the voltage button and hold for 1 second, the voltage LED should move to next. For PCB5.5C voltage and Special chip selection: 1. Repeat those steps till all DIP bit ae set same as software indicated. Press DIP Bit shift button to shift the DIP bit position to where need to set.Īnd then press DIP Set button twice to check current DIP bit position. Press DIP Set button twice to check current DIP bit position. For the USB power only 5V Vcc is available. PCB3.5/PCB4E (Two PLCC32 adapter is not applied on the PCB4E) PCB5.0 PCB5.5C Note: the Vcc setting jumper only has effect when you are using AC adaptor as power source. If the connection and power supply is normal, then appears: 'Hardware present' Otherwise check if the programmer connects well with PC, or power supply is normal. The software interface: Hardware Check After start the program, click test hardwar under Help menu. If the board selection set to PCB3.5, PCB5.0, PCB5.5C, then the software 0.98D6 should be used.

When set the jumper to PCB3B, then user have to use 0.97ja and before version software. To enter the BIOS setting mode, you need press 'Del' key or 'F1' key during the computer selftest, which is the moment of computer just power up.) Software Version To Use The software can be download from There are board hardware selection jumper on the board. (Note: the LPT port of PC MUST set to ECP or ECP+EPP during BIOS setup. Set the DIP switch based on the displayed pattern. Standard PCB3B Willem Programmer User Guide Enhanced/Dual Powered Willem EPROM Programmer User Guide Main Board / Cables Main Board PCB3.5 Main Board PCB4E Main Board PCB5.0 Main Board PCB5.5C Parallel Data Cable (Printer extension cable, with male-female 25 pin connector, and pin to pin through) A-A type USB cable(for power) Optional Items: ATMEL 89 Adapter ATMEL PLCC 44 Adapter TSOP 48 Adapter FWH/HUB PLCC32Adapter PLCC32 Adapter SOIC Adapter(Simplified) On-Board On-Board AC or DC Power Adapter (9V or 12V, 200mA) SOIC Adapter(Professional). PCB4.5C, PCB4C, PCB3.5, PCB3b, SoftwareVersions:0.98D12C3, Software of the ordinary- 1 Qty/ Willem EPROMProgrammer PCB 50X- 1.You can choose between Version PCB3B/PCB3.5 and PCB4.5C usingjumper setting if Willem EPROM Software. Updated software Willem EPEOM PCB 50a(0.98D12)© only support The newest. Uses the power supply from the USB Supports Win9X, Me, XP, NT, 2000 and VISTA operating systems. Willem EPROM PProgrammer PCB 50© and PCB4.5C can support the chip 29/39/49LVxxx (Low Voltage 3.3V).

Pcb50e willem eprom programmer software download